Here's the chassis with most of the panelling off. I've dropped the roll cage on but there's some debate about whether this type of 'cage' is permitted by the Motor Sports Association (MSA). :-( Tim Cheney's MNR has a very similar cage!
see you posted a thread about bending alloy pipe for cooling pipes..
used this type of pipe on ny hillman imp to plumb in a front rad..
you can bend at home - I hired a large bender from HSS hire shops.. used a large copper pipe bender that did upto 28mm dia for 1.5 thick tube - they also do a conduit bender that does up to 35mm dia.
3 comments:
Hi Wyn,
see you posted a thread about bending alloy pipe for cooling pipes..
used this type of pipe on ny hillman imp to plumb in a front rad..
you can bend at home - I hired a large bender from HSS hire shops.. used a large copper pipe bender that did upto 28mm dia for 1.5 thick tube - they also do a conduit bender that does up to 35mm dia.
hope that helps
Si
something like this from Brandons
http://www.brandontoolhire.co.uk/pipe-hire/prodview.asp?idproduct=31
Thanks Si
I didn't know it was possible to leave comments on here until a friend told me!
I'll have a look at the bender when I get round to doing the cooling (it's still a bent chassis right now!)
Wyn
Post a Comment